How to Factory reset Haier TV and troubleshoot other issues?

There is no need to introduce the Haier brand. They have released high-quality items, notably the Haier TV brand, that compete with big brands like Samsung. Your Haier TV, like other appliances, may malfunction for a variety of reasons. Fortunately, Haier TV problems aren’t always as hard as they appear, and you won’t have to spend a lot of money to fix them. So, before calling for help or ordering an expensive replacement, try troubleshooting your gadget to see whether the issue can be fixed. Here are some troubleshooting suggestions for some of the most common Haier TV problems. However, the highlighted topic will be How to Factory reset Haier TV. 

How to Reset a Haier TV?

If your TV has one, you can use the menu button on the top or side to reset it. The reset instructions can be found in the menu options for your TV if it does not have a menu button on the top or side.

To use the menu button to reset a Haier smart TV:

• For at least 10-15 seconds, press and hold the menu button on the top or side of the television.
• You’ll see an on-screen menu asking you to set the time, date, and location.
• Follow the directions on the screen. After that, your TV will be reset to factory defaults.

To factory reset a Haier LE65K6500U, follow these steps:

• To turn on the TV, press the power button on the remote controller.
• To access the Main menu, press the Home button.
• Use the directional buttons to browse the menu.
• Select “Settings” from the drop-down menu, then hit the OK button on the remote.
• Select “General” on the remote and push the OK button.
• Press the OK button after selecting “System Recovery.”
• To confirm, select “Recovery” and press the OK button.
• Then wait until the process of resetting is finished.

Okay so, the main problem has been addressed which is ‘’How you can Factory reset Haier TV’’. Now we can move further to other problems which are also significant in the case and are faced by many users. 

Let’s start with the very basic issue which is about turning on the Haier TV. 

Why my TV is not turning on?

If your Haier TV won’t switch on, it could be due to a power outage, a problem with the power socket, or a problem with the TV itself. To determine whether the problem is with the power source or the television, follow these steps:

• Examine whether or not the current power supply in that power source is working properly. Contact your electrician if there is a problem with the energy supply in the socket. You may validate the same by connecting another device to the same socket.
• If the supply line appears to be in good condition, double-check that it is correctly placed on both ends.
• Check to see if the TV’s power switch is stuck.
• If the problem persists, unplug the television and wait 60 seconds. Then re-insert the plug into the wall outlet and turn the TV back on.

The Red Light on my Haier TV is On but it won’t turn on. What to do?

The red light on a TV that won’t switch on could indicate that the TV is receiving a signal. It’s possible that the signal cable has become loose or has fallen off. Check to see if the signal cable is loose or has fallen off. Now review once to make sure that everything is all set and working fine.

If the connection is good, try disconnecting the TV for 10 minutes and then pushing and pressing the power button on the TV for 60 seconds to reset it. After that, plug it in and turn it on.

If your problem hasn’t been solved yet then you need to try the following steps:

• Remove the power cord from the television.
• Allow at least 60 minutes to pass.
• For 60 seconds, press and hold the power button on the television.
• Hold the power button down for another 60 seconds after plugging it back in. When connecting in, bypass any power strips or surge protectors and go straight to the wall outlet.
• If the reset method does not resolve the problem, it may be due to a hardware failure. The IR sensor, the Main Board, or both could be to blame.

Now, this method should be the one solving your issue.

Could you think of any other issues that may occur with your Haier TV other than how you can Factory reset Haier TV? Well if you haven’t we did and we have given the solutions as well so that when they happen with you, you know what you need to do. Some people are facing Haier TV sound issues as well. Are you one of them? This is definitely worth it for you. 

Sound Issues with Haier Televisions

If the sound on your Haier TV isn’t working, it could be due to one of the following issues:

• The volume level is set too low.
• The volume is turned down.
• The sound system isn’t working properly.

To remedy the problem, use the following troubleshooting steps:

• By pushing the VOL+ button on the remote control or the TV, you can increase the volume.
• Press the mute button on the remote control to see if the TV is muted.
• Examine the audio input frequency signals.

No picture on Haier TV, it’s Only Sound

You have to follow the method given below that will help solve the NO picture on Haier TV. 

• Check the antenna connections on the back of the TV to make sure they are connected properly.
• It’s possible that there’s an issue with the broadcast station. To see if there is an image, try switching to a different channel.
• Adjust the contrast and brightness settings if necessary.
• Closed Captions should be checked. Some TEXT modes may cause the screen to be blocked.

No picture, no sound on Haier TV

• Activate the power supply.
• Make that the TV is properly plugged into the outlet.
• Check to determine if the other appliance’s power cable is plugged into the TV set.
• Make sure the TV’s power cable is connected properly.
• Make sure the contrast and brightness aren’t cranked down.

The remote control on my Haier TV isn’t working

For a variety of reasons, your TV may not respond to the remote control. Now do the following method that is given below and it will resolve your problem.

• Check to see if the remote’s batteries are still OK. If required, replace with fresh ones.
• Check to see if anything is blocking the remote controller’s display receiving window.
• Clean the remote control sensor lens on the TV, then select TV mode to make sure your remote is in TV mode.

Without a remote, how can I turn on my Haier TV?

When the remote is not in use, you can turn on your TV by pressing the power switch button. Follow these steps to turn on a Haier D29FA11-AM TV:

• The power supply line should be connected. Then, on the power switch, press the button. The power indicator will begin to illuminate. The image will appear on the screen in a few seconds.
• If the TV is in standby mode, hit the CH+/- buttons on the remote control to wake it up.

All issues that are considered above have their best solutions which will definitely help you with your problem whether the Factory reset Haier TV or you want to turn on your Haier TV without the remote. It’s all here.